Stoły warsztatowe - wszechstronne, mobilne i kompaktowe
Aktualności

Workbenches - versatile, mobile and compact

We are expanding our range of workshop tools and accessories by introducing a new product category – workshop tables. This is another step toward comprehensive equipment for workplaces in workshops and on construction sites. The new items fit into the brand's strategy, which aims to provide solutions that make work easier and faster.

Versatility of use

Multifunctional workshop tables provide versatility for the tasks performed, save space thanks to a foldable, compact design, and offer mobility. The materials used guarantee resistance to loads and durability. Foldable, multifunctional workshop tables are a practical solution for both professionals and DIY enthusiasts. Their main advantages, besides load resistance, are quick folding, easy transport and storage, which save space in the workshop or garage. Thanks to various features, such as height adjustment, mounting holes or accessory trays, these tables support ergonomics and order at the workstation. A robust construction of steel and aluminum and durable tops ensure longevity and stability even with intensive use. They are a mobile work center that can be adapted to many tasks and needs.

HT7G540 – Workshop table with bamboo top

Features:

  • Dimensions: 700 (W) x 650 (D) x 915 mm (H).
  • Load capacity: up to 450 kg.
  • Material: steel + bamboo top.
  • Equipment: 2 F-clamps, stopper pins, connector, table.
  • Foldable design.

Benefits:

  • Mounting holes in the top and stopper pins increase the table's functionality.
  • The foldable bamboo top is durable, moisture-resistant and damage-resistant.
  • Height adjustment.
  • The angle scale printed on the top makes cutting and assembly of workpieces easier.
  • Special connectors allow joining two tables together.

HT7G541 – Workshop table with MDF top

Features:

  • Dimensions: 845 (W) x 598 (D) x 735-885 (H) mm.

  • Load capacity: up to 450 kg.

  • Material: steel + MDF top.

  • Adjustable top height.

  • Equipment: 2 clamps, 3 containers, stopper pins, connector.

Benefits:

  • Height adjustment provides ergonomic working conditions.

  • Three practical containers help keep things organized.

  • Special connectors allow joining two tables together.
  • Mounting holes in the top increase the table's functionality.

HT7G542 – Workshop table with aluminum top

Features:

  • Dimensions: 600 (W) x 570 (D) x 770-1070 (H) mm.

  • Height adjustment: 770–1070 mm.

  • Top tilt range: 0–80°.

  • Gap range between the top beams: 0–17.5 cm.

  • Load capacity: 100 kg.

  • Material: steel + aluminum.

  • Weight: 12.5 kg.

Benefits:

  • Adjustable tilt and height provide ergonomics and optimal working conditions.

  • Top divided into two beams with adjustable relative position.

  • Aluminum-steel construction ensures durability with low weight.

  • The angle scale printed on the top makes cutting and assembly of workpieces easier.

HT7G543 – Table for miter saw ukosowej

Features:

  • Adjustable spacing of supports with rollers: 1090–1670 mm.

  • Working height: 6150–820 mm.

  • Width: 700 mm.

  • Load capacity: 100 kg.

  • Frame material: steel + aluminum.

  • Universal mounts fit most miter saws.

Benefits:

  • Large, durable wheels make moving easier, including up stairs.

  • Containers and a metal grid on the top allow convenient tool storage.

  • Tilting supports on the legs allow placing workpieces such as beams/strips/boards on them.

Sawhorses, trestles, workshop and construction supports

Versatile and reliable support during various installation, carpentry or renovation works is provided by sawhorses. Thanks to their stable construction they enable safe support of large and heavy elements. Often equipped with height adjustment, they allow adapting the workstation to individual needs, improving ergonomics and user comfort.

HT7G551 – Foldable, adjustable workshop sawhorse

Features:

  • Dimensions: 1088–1150 (W) x 520–690 (D) x 615–820 (H) mm.

  • Working height range: 61.5 – 82 mm.

  • Support spacing range: 40 – 90 mm.

  • Maximum load capacity: 590 kg.

  • Weight: 9.6 kg.

  • Steel foldable construction

Benefits:

  • Adjustable height allows adapting the workstation to the type of work.

  • Possibility to connect two sawhorses to create a worktop.

  • Non-slip surface on the supports ensures that workpieces or the top will not slip.

  • Foldable design facilitates transport and storage on site or in the workshop.

Check out our full range of work tables and sawhorses

Author: tomasz_zacenski

You may be interested in...

View posts
Ograniczona widoczność: Jak wybrać kamizelkę ostrzegawczą odpowiednią dla Twoich potrzeb?

Limited visibility: How to choose a high-visibility vest suitable for your needs?

Car warning vest should be in every vehicle – in case of a breakdown it will allow the driver standing next to the vehicle to remain visible even after dark. However high-visibility vests are also an essential piece of equipment for construction workers, road workers and many other jobs. Check what to consider when buying a warning vest! Is a warning vest mandatory? A warning vest is an inexpensive item of clothing that everyone should have. It is useful not only in the car, but also when cycling after dark or even as protection for a pedestrian walking on the roadside.  Do you have to have a warning vest in the car? Polish regulations do not impose such a requirement on drivers. They indicate, among other things, the need to have a reflective triangle and a fire extinguisher. Although you won't get a fine for not having a warning vest, it is definitely worth having one. If you often travel with passengers, it's best to equip yourself with reflective vests in quantities sufficient to provide visibility to passengers if needed. Reflective warning vest – a requirement in many professions While a high-visibility vest for a motorcycle, bicycle or car is not required by regulations, in some professions it is. Professional high-visibility clothing is a necessary part of the wardrobe for airport workers, heavy equipment operators, construction workers, and people performing official duties on roads or in railway areas. As for warning vests, regulations in 2023 require them to be one of three colors: yellow, orange or red. In addition to fluorescent colors, they must also have reflective elements.  High-visibility clothing is divided into class one, two and three. In the case of warning vests only classes one and two are possible, because class three requires reflectors on the sleeves or trouser legs. Such a standard is met, for example, by warning jackets. A class one high-visibility vest must have 0.14 m2 of fluorescent background, while the total area of reflective elements must be 0.10 m2. For class two these values are 0.50 m2 and 0.13 m2 respectively. A professional class 2 vest is ORLA Warning Vest. Available in two colors – orange and yellow, it meets EU standards EN ISO 20471 and EN ISO 13688. Two reflective strips 5 cm wide provide visibility, and the anatomical fit guarantees comfort of use of the reflective warning vest both during work duties and while traveling by bike, motorcycle or on foot. Summer and winter warning vest to suit your needs When choosing a reflective warning vest for pedestrians, cyclists or motorcyclists, pay particular attention to its size and the quality of the material. Contrary to appearances, fit is very important – especially if you will be wearing the vest for a long time. This type of body-protecting clothing is available in standard sizes – from S to 3XL. Importantly, these products are not divided into men's and women's high-visibility vests – they are universal garments with a simple cut. In cold months, an insulated work warning vest will provide protection against cold, wind and precipitation. The REMS insulated warning vest model has a warm inner layer. An additional convenience is a zipper closure instead of traditional Velcro. This solution allows better protection against low temperatures and weather conditions. The REMS warning vest also has two inner pockets that allow for storing accessories useful at work. How much does a reflective warning vest cost? Purchasing a reflective PPE vest will not usually ruin the household budget of someone who wants to be visible while cycling or to have such important protection in the car. You can also find much cheaper products in stores and at online auctions. Do yellow and orange reflective vests for 4–5 PLN differ from those from a trusted manufacturer costing a dozen or so zlotys? Although they may look the same at first glance, you will notice the difference in how long the product lasts. The reflective warning material on high-quality vests is much more durable – it retains its shape after many wash cycles. Meanwhile, cheap reflective vests often lose their properties after just 2–3 washes.  So if you don't want to spend two years wearing a vest that has never been washed, choose a higher-class product. Quality matters especially when you buy reflective warning PPE vests for your employees. Of course you'll pay more for an insulated warning vest with pockets. For the aforementioned REMS model you'll pay 166 PLN. In this case, however, you should particularly take quality into account. A vest of poor quality, made of non-breathable material, will cause significant discomfort during work. It is definitely better to opt for products from a trusted warning vest manufacturer.Author: Paweł Sokołowski

Read more
Oznaczenie CE na produktach

CE marking on products

WHAT IS THE CE MARK? The CE marking (Conformité Européenne) is the European conformity mark. Its use on a product's packaging indicates that the manufacturer has applied and fulfilled the relevant requirements contained in European directives/regulations, as well as in the European standards covering the product. A product that meets safety requirements will be marked with the CE mark, thereby informing the user that it is safe and has been properly placed on the market.WHY WAS IT INTRODUCED? After the European Union removed trade barriers between Member States and established a common policy toward partner countries outside the EU, an area of free movement of goods was created within the Community. However, the main barrier to trade remained national requirements concerning, for example, the quality and safety of products. The national systems of regulations and standards used by countries often differed significantly from one another. This caused a range of problems for manufacturers who, in order to sell their product in different countries, had to meet separate requirements each time. Because consumer safety could not be compromised by eliminating standards, the only solution was to harmonize national systems so that goods would be subject to the same requirements throughout the Community. In 1993, European legal acts called NEW APPROACH DIRECTIVES were created at EU level. They defined essential safety requirements for different groups of products that must be met before they can be placed on the market or put into service on the Single European Market. IS CE MARKING MANDATORY OR VOLUNTARY? if a product falls under one of the New Approach Directives, CE marking is mandatory. applying CE marking to products that are not subject to the New Approach Directives is prohibited. WHO CAN AFFIX THE CE MARK? CE marking may be affixed by the manufacturer or their authorized representative. Most products fall under Module A, i.e., the manufacturer's self-assessment module. If another module applies (B or D), an EU type-examination certificate must be obtained in cooperation with a notified body (a certifying institute). WHAT IS A CE CERTIFICATE? The term "CE certificate" does not exist in the nomenclature of the New Approach directives. If someone talks about a CE certificate, they most likely mean the EU declaration of conformity or the EU type-examination certificate confirming the product's conformity with the relevant EN standard. Currently, the process of marking and certification is regulated by Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC. Source: https://www.oznakowanie-ce.plAuthor: Grzegorz Nowak

Read more
Czym różni się odzież robocza od odzieży ochronnej?

What is the difference between workwear and protective clothing?

In 2022 as many as 66,606 occupational accidents were reported in Poland. 365 of the injured suffered very serious injuries, and the number of fatal accidents amounted to 180. In almost 80% the lower or upper limbs were injured. Among the most common causes was contact with a stationary or moving object. These data clearly indicate how important it is to provide employees with appropriate protective clothing. Differences between protective clothing and workwear To begin with, it is worth dispelling an important mistake. The term „occupational protective clothing (PPE)” and “workwear” are often used interchangeably. However, they do not mean the same thing. To fully answer this question, it is useful to know the exact definitions of both concepts. Definition of workwear and protective clothing Workwear is clothing used in the workplace when there is a high risk of soiling or damaging outer garments. In other words, workwear replaces the employee’s clothing in situations where it may become dirty or ruined while performing duties. The use of uniform work outfits may also be related to building brand recognition (e.g., bank or insurance company employees). And what is protective clothing? The definition states that it is clothing used in the workplace that is intended to cover or replace personal clothing. In addition, it is designed to provide protection against hazards. Both conditions must be met, so workwear that does not protect against specific dangerous substances or events is not protective clothing. Applications of workwear and protective clothing When is protective clothing used? Examples of such situations can be found in every industry. It is most often used by employees on production floors and those working in the field, and its purpose is to protect against impacts and cuts (such as protective boots with a steel toe cap). There is also protective clothing for welding and heavy aprons for laboratory technicians who come into contact with hazardous substances. Work clothes are used even more frequently. They can be found in organizations that care about brand recognition linked to employee attire. Work uniforms are also widely used in the catering industry. Types of protective and work clothing Any clothing can be divided according to the part of the wardrobe it represents: protective or work gloves, trousers, jackets, boots or vests. It is worth paying more attention to the classification of protective clothing depending on the hazard it is meant to protect against. In this context, one can list: Protective clothing for welders, protecting against electric arc, burns and splatter. Harnesses related to working at heights. Insulating protective clothing, used by electricians. High-visibility clothing, protecting road workers, as well as emergency services operating at the scene of a road accident. Chemical protective clothing, resistant to short-term exposure to hazardous corrosive substances. Protective earmuffs that protect against excessively loud equipment noise. Flame-resistant protective clothing for firefighters and people working near open flames. Additionally, categories of protective clothing may also concern seasons, such as winter and summer protective clothing. Protective clothing markings Types of protective clothing can also be characterized by the areas of the body they are meant to protect. Protective clothing (symbol U). Lower limb protection (symbol N). Upper limb protection (symbol R). Head protection (symbol G). Face and eye protection (symbol T). Hearing protection (symbol S). Respiratory protection (symbol D). Protection against falls from height (symbol W). Full body insulating protection (symbol I). So how to choose the appropriate protective and work clothing for your workplace? That is always the employer’s responsibility! Employer's obligations regarding protective and work clothing Under current labor regulations, the employer is obliged to provide the employee free of charge with workwear, protective clothing and personal protective equipment (PPE) if required by the working conditions. Importantly, the decisive factor is the conditions prevailing in a given work environment, not, for example, the job title. For this reason, employees in similar positions at different companies may receive a different set of clothing. Protective clothing is the employer's obligation The employer must determine what professional workwear and protective clothing are needed for each employee. This usually takes place during a dialogue with employees or their representative. These arrangements are then entered into the work regulations, which define the conditions for being in the workplace, as well as equipping employees with tools, materials, protective and work clothing and personal and hygiene protective equipment. Typically the details are presented as a protective clothing allocation table for each position. Work clothing and footwear provided by the employer Work and protective clothing are provided free of charge. At the same time, they remain the property of the employer. This means that upon termination of employment, all personal protective equipment and allocated clothing must be returned to the supervisor. Also, in the event of clothing being destroyed due to the employee’s fault, reimbursement of the purchase costs is required (after accounting for depreciation). Employer's duties regarding employee safety The employer’s duties related to protective clothing and workwear also include cleaning, maintenance, repair, dust removal and disinfection. However, employees often wash their work clothes themselves. In such cases they are entitled to reimbursement of the costs they incur. Standards and certifications of workwear and protective clothing Workwear does not require certification, because its primary task is to protect personal clothing from dirt or damage. However, specialist protective clothing for workers must meet specific standards and criteria in order to effectively protect against hazards in the workplace. Clothing materials: what determines their protective properties? Protective garments are made from natural materials (cotton), regenerated (cellulose-based) and synthetic materials (polyester or polyamide). From these, several dozen popular materials with specific properties have been developed. Among them you can find: Ortalion made from polyester. It is characterized by very low weight and high resistance to damage. Fleece, a soft and warm polyester knit. Stretch, i.e. stretch fabrics with added Lycra or PBT. Corduroy, a warm cotton fabric resistant to cuts and tears, but prone to abrasion. Ballistic nylon, also used in the production of bulletproof vests. It is very resistant to damage and abrasion. Kevlar, an elastic material that is also extremely durable. The choice of the appropriate material depends on the work environment and the conducted occupational risk analysis. Certification by EN ISO standards: what does it mean for protective clothing? In Poland, EU Regulation No. 2016/425 of 16 March currently applies. It specifies a number of standards for particular types of protective and specialized clothing. It is there that the exact parameters that protective clothing for firefighters, welders and other positions must meet are defined. All protective garments must also have certificates confirming compliance with the above standards. To obtain them, clothing undergoes rigorous laboratory tests, which must then be repeated at regular intervals. Summary: protective and work clothing There are still many workplace accidents in Poland. To provide employees with the best possible protection, protective clothing and personal protective equipment are used in accordance with the protective clothing allocation table. Each such garment must meet protective clothing standards, confirming protection against hazards in the working environment. In many positions, an employee also receives workwear that protects personal clothing from damage or soiling. In this case, there is no need to obtain certifications. Both workwear and protective clothing belong to the employer, who should care for them: clean, repair and maintain them.Author: Grzegorz Nowak

Read more
30-day returns

30-day returns

Extended warranty up to 4 years

Extended warranty up to 4 years

Free shipping from 199 zł

Free shipping from 199 zł